How to crochet socks do it yourself

Pin
Send
Share
Send

Today I propose to discuss a very important topic "How to crochet socks." Socks are more suitable for the cold season, so we will choose a thick yarn. But if you are a needlewoman with experience, you can try a complex openwork model, which will take a very long time.

How to crochet knit socks (step by step patterns in pictures)

How to quickly learn to knit socks crochet child or adult, if you're still a novice? Especially for you we have collected the most simple and interesting lessons from the best masters of the network. Starting from the simplest, we propose to move on to more complex ones, delighting their home with warm cozy new clothes.

Women's homemade woolen slippers for an adult leg (micron for women)

Knitting this model will take a minimum of time, and if you follow all the recommendations correctly, in the future you will be able to move on to more complex products.

Size 37-38 Yarn - “Village” of Troitsk, natural color (1508), 100% wool, 170 m / 100 g., Yarn consumption 100 g Hook No. 3.5 Density of knitting of the main knitting (single crochet) Pg = 1 , 54 loops in 1 cm, PV = 1.8 rows in 1 cm. Leg girth (He) 23 cm Description of work: We begin to knit slippers from the toe. We make a sliding loop, knit 6 single crochets into it, including 1 air lift loop, then knit a circle, obeying the main rule of knitting a circle: the number of columns added in each row should be equal to the number of columns in the first row, in our case - 6. Work at the beginning of a new series of turn. If you knit without turning the work, the pattern on the toe and the rest of the slippers will be different in appearance. Knit until the circumference is equal to the girth of the leg. Calculate the number of columns. It will be equal to the measure of the girth of the foot multiplied by the density of knitting across: It is x Pg = 23 x 1.54 = 35.42. Round, we get 36 columns. That is, you need to knit in a circle with increments until we get 36 loops (columns). Considering the rule of a circle, to get 36 columns you need to link 6 rows. It is quite possible that according to your calculation in the last row you will need to make fewer increments - there is nothing to worry about, just distribute the required number of increments evenly in a circle. Next, we continue to knit in a spiral without increases. We knit the desired length of the toe, in this case just below the thumb bone, which was 7 cm or 14 rows. We knit the middle part of the slipper with a straight blade. The middle part will have 2/3 of the 36 columns, i.e. 24 columns. We continue to knit the middle part. Slipper will make the foot shorter by about 2 cm, so that it fits more tightly on the leg. At this stage, it is possible to iron the middle part of the slipper, since the canvas, connected with crochets, is twisted. So the product in finished form will look neater. However, this can not be done: the slipper will sit on the leg well without it. Now we begin to form the heel. To do this, divide the loop into three parts. The number of loops in the middle section is 1/3 of 24 loops - 8 loops (columns) are obtained. If you have got 1 loop in the rest - add it to the middle part, if 2 loops - one by one to the side parts. Shape the heel will be shortened rows. We begin to knit the heel from the wrong side. We knit 8 columns without the first part, then - 7 columns without the middle one, skip the 8th column of the middle part, and knit the connecting column in the first loop of the third part. The heel is obtained more accurately, if on the front side of the last, knit the connecting stitch as usual, introducing the hook into the loop in front, and on the wrong side - inserting the hook into the loop from behind. The work is turned on the front side. We knit the first column in the shortened row without a lifting loop into the first loop from the hook. Again we knit 7 loops of the middle part with single crochets, and in the first loop of the side part we knit a connecting column, with the hook inserted into the loop in front. We continue to properly knit the heel in the same way, attaching the loops from the side parts. Finish knit heel face front. The result is such a neat heel. Now we tie the edge of the slipper (except for the heel) with single crochets, lightly tightening the edge for better fit of the slipper on the leg. Then knit along the edge of a series of connecting columns, already including the heel. We cut the thread and hide its end. Slipper ready. The second is knitting in the same way. In our example, the finish is made of motifs in the style of “patchwork”, and at the end, the edge is additionally tied with two rows of connecting columns with blue yarn. Motifs are attached to the slipper in the process of tying the edge.

Ideas for men

Men's socks for a loved one - the easiest way.

Size 42

Materials:
1. Plain Wool Thin Yarn for Socks (Two Pieces)
2. Hook 2.5 mm
3. Hour 3 for each sock

Sock will knit from toe. The sock is connected by semi-columns!
Dial 4 in. p., close the ring ... further under the scheme.

Last row of toe = 52 loops. Then we continue to knit in a circle in semi-columns, adding 2 loops = 54 loops in the first row after the toe. 20 rows of 54 loops in each circular row. The seam is located on the sole.

For the heel, split the loops on the floor. Knit on 27 loops soles. To do this, move back from the seam connecting columns 13 loops.

The lower part of the heel is a triangle. We continue to work in semi-columns.
Knit a triangle on 27 loops, diminishing one stitch in each row on both sides (knit 2 half-columns together), until one loop remains on the hook.

Now we will perform a wedge lift and the back of the heel together. To do this, type along the edge of the triangle on each side, 21 loops; on the front, which we did not touch, there should be 28 loops = total first circular row (in me it is made of beige threads) 70 loops.

Side view. Note that the triangle is the bottom of the heel, not the whole heel. To form a wedge of lift, make a decrease on both sides of the top of the sock. Decrease = 3 half-columns knit together.

Turn down until 46 loops remain in the row. Only 10 round rows.

Now gum. Knit according to the following scheme:
1 row: double crochets in each loop
2 row: 2 in. lift point, * front relief double crochet column, 1 simple double crochet column *, repeat from * to * to the end of the row.
3-16 rows: 2 in. n. lifting, * front embossed column in the embossed column of the previous row, double crochet into the double crochet of the previous row *, repeat from * to * to the end of the row.

Done!

Knitted children's models (photo)

Children's feet should always be warm, so women love to delight kids with funny crafts with their favorite characters.

Simple baby booties

Yarn: “Souffle”, Semenovskaya yarn, acrylic 100%, 292 m / 100 g. Yarn consumption 25 g. Instruments: hook number 2.5. The size: sole length 12 cm. Booties, slippers are connected by columns without nakida. The sole is oval. See a detailed workshop on knitting soles and you can knit the soles of the size you need from your yarn. Sole length is 12 cm. Width is 6 cm. At the beginning we knit a chain of air loops 7 cm long or 13 loops, plus 1 air lift loop. Connecting the sole according to the scheme, we obtain 56 loops along the perimeter of the sole. Side part Top knit booties knit without crochet columns in rows. We knit the first row with purl (at work) in relief columns with a single crochet to form a welt. For lifting knit one air loop. We close the row with a connecting post, turn the work and knit the next row. Next, continue to knit with crochet without crochet for another 7 rows. Total side part turns 8 rows. The height of the side can be from 2 to 3 cm. In our case - 3 cm. Toe We knit the crotch shortened rows. We find the center of the sole in front: 13 loops of the middle part, plus 7 loops in the front - the 21st loop from the beginning of the row will be the middle of the bootie in the front. You can just bend the booties in the middle. From the center, mark 5 loops left and right. Determine the number of loops needed to knit toe. The width of the toe is equal to the width of the sole or slightly less. In our case it is 11 loops (columns). In the photo, the center of the toe is marked with a pink marker, and the extreme loops of the toe are marked with blue markers. 9th row: 15 loops of the side and 10 loops of the toe knit with columns without crochet, skip the loop, 1 connecting column; 10 row: We knit 10 loops of the toe with columns without crochet, skip the loop, connecting column. Attention! The first loop in the row is tight, do not miss it. Next, knit another 8 rows in the same way as the 10th row. A total of 10 rows. The toe takes about half of the booties in length.In the 19th row continue to knit the bootie in a circle and close the row. The loops in this series are not diminishing. The top of the booties is tied with Ears step. Second knit knit as well as the first. We decorated booties with a crocheted bow. You can decorate booties to your liking.

Crochet socks for beginners (crochet)

A video tutorial with a detailed description helps to disassemble the entire knitting process in detail. Thanks to accurate calculations and valuable comments of the master, the student is able to master even the most complex model.

Beautiful fishnet socks - master class

Openwork products look especially beautiful, but they require more patience. Starting from the elastic band, you can tie them up with the thinnest thread, creating the thinnest lace (the short and high styles look good).

Slippers boots from motives

Socks for men

Female option

Knitting socks for newborns

The legs of the newborn should be warm, so I suggest universal cool models for the little ones.

Crocodile boots for kids (poetpno)

Children's sneakers slippers for the boy

Home version on felt sole

Interesting minion slippers

Pin
Send
Share
Send

Watch the video: How To Crochet the Home All Day Slipper Socks, Episode 414 (May 2024).